Samsung HD204UI Spinpoint F4 2TB Hard Drive SATAII 32MB Cache - OEM
While other 2TB drives split their collection of bytes over four 500GB platters, Samsung's Spinpoint EcoGreen HD204UI F4 features three 667GB disks. This means the new platters boast the world's highest areal density at the moment.
The 3.5-inch F4 is intended to replace Samsung's four-platter F3 drive, and has otherwise similar specs. The drive is bolstered by a 32MB buffer, and the platters spin at 5400rpm, rather than the 7200rpm rotational speed of some other 2TB desktop drives
The new three-platter drive also cuts down on power consumption. The F4 eats 23 per cent less electricity in standby mode than its predecessor. The drive will remain quiet while it's ticking away, taking advantage of the company's SilentSeek and NoiseGuard technologies.
The new Spinpoint HD204UI F4EG also supports Native Command Queuing
Key Features
667GB Formatted Capacity Per Disk
Serial ATA 3.0Gbps Interface Support
Improved recording stability over temperature with PMR
Advanced dynamic FOD control for best data integrity
Intelligent compensation of external disturbance
SATA Native Command Queuing Feature Device Initiated SATA Power Management
Shock & Rotational vibration sensor
Environment friendly product with RoHS compliance
Improved performance with dual-ARM based firmware
ATA S.M.A.R.T. Compliant
ATA Automatic Acoustic Management Feature
ATA 48-bit Address Feature
ATA Device Configuration Overlay Feature
NoiseGuard
SilentSeek
3 Year Warranty
SPECIFICATION
Drive Configurations
Capacity = 2TB
Interface = Serial ATA 3.0Gbps
Buffer Size = 32 MB
Byte per Sector = 4K Sector with Emulation
Performance Specifications
Average Seek time = 8.9 ms
Data Transfer Rate / Media to/from Buffer = 250MB/sec
Data Transfer Rate / Buffer to/from Host = 300MB/sec
Average Latency = 5.52 ms
Drive Ready Time = 13 sec
Reliability Specifications
Non-recoverable Read Error = 1 sector in 1015bits
Acoustics
Idle = 2.5/2.6 Bel
Performance Seek = 2.8/2.9 Bel
Environmental Specifications
Temperature / Operating = 0 ~ 60 °C
Temperature / Non-operating = -40 ~ 70 °C
Humidity(non-condensing) / Operating = 5 ~ 95 %
Humidity(non-condensing) / Non-operating = 5 ~ 95 %
Liner Shock(1/2 sine pulse) / Operating = 70 G
Liner Shock(1/2 sine pulse) / Non-operating = 300 G
Altitude(relative to sea level) / Operating = -1,000 to 10,000 ft
Altitude(relative to sea level) / Non-operating = -1,000 to 40,000 ft
Power Requirements
Voltage = +5V±5%, +12V±10%
Spin-up Current = 2.0A
Seek = 5.7W
Read/Write = 6.3W
Idle = 5.1W
Standby = 1W
Sleep = 1W
Physical Dimension
Height = 26.1 mm
Width =101.6 mm
Length = 147.0 mm
Weight = 650g
Technical Specification
Manufacturer ID: HD204UI
General
|
|
Device Type |
Hard drive - internal |
|
Width |
10.2 cm |
|
Depth |
14.7 cm |
|
Height |
2.6 cm |
|
Weight |
0.65 kg |
|
|
Hard Drive
|
|
Form Factor |
3.5" x 1/3H |
|
Capacity |
2 TB |
|
Interface Type |
Serial ATA-300 |
|
Buffer Size |
32 MB |
|
Features |
NoiseGuard, SilentSeek technology, Native Command Queuing (NCQ), Perpendicular Magnetic Recording (PMR), Flying On Demand (FOD) Technology, Automatic Acoustic Management, Device Configuration Overlay, 48-bit Address |
|
Compliant Standards |
S.M.A.R.T. |
|
|
Performance
|
|
Drive Transfer Rate |
300 MBps (external) |
|
Internal Data Rate |
250 MBps |
|
Seek Time |
8.9 ms (average) |
|
Average Latency |
5.52 ms |
|
|
Reliability
|
|
Non-Recoverable Errors |
1 per 10^15 |
|
|
Expansion / Connectivity
|
|
Interfaces |
1 x Serial ATA-300 - 7 pin Serial ATA |
|
Compatible Bays |
1 x internal - 3.5" x 1/3H |
|
|
Miscellaneous
|
|
Compliant Standards |
RoHS |
|
|
Environmental Parameters
|
|
Min Operating Temperature |
0 °C |
|
Max Operating Temperature |
60 °C |
|
Humidity Range Operating |
5 - 95% (non-condensing) |
|
Shock Tolerance |
70 g @ 1ms half-sine pulse (operating) / 300 g @ 1ms half-sine pulse (non-operating) |
|
|
